How to Clean iPhone Speaker?

Have you ever noticed how your iPhone speaker sounds different if it’s been exposed to a lot of dust and dirt? Everyone knows how frustrating it can be when you’re trying to make a phone call and the person on the other end of the line can’t hear you.

If this sounds like something that happens to you, then there are some simple steps you can take in order to clean your iPhone speaker.

These tips will help improve sound quality and clarity so that when you do have an important conversation with someone, they will be able to hear everything clearly. So let us discuss how to clean iPhone speaker.

Get your Phone Ready Before Cleaning

Clearing your iPhone before you start cleaning it is an important step that will allow for a more thorough and efficient cleaning. Unplug any cables, take the device out of its case if applicable, remove the screen protector as needed (if possible), and turn off the phone to avoid accidental taps on sensitive surfaces while in use.

Related Post: How to Clean AirPods?

Clean your Phone

Before you work on cleaning your speakers, it’s important to make sure that all surfaces of the phone are clean. The best way to clean your iPhone is with a lint-free cloth.

It will get all the dust and germs out of that little nook in between the keyboard and screen, so you don’t have to worry about it for weeks! Just make sure not to use anything scratchy or abrasive – no paper towels because they’re too rough on delicate screens like those found on iPhones.

To really give your phone a deep clean, wet one corner of the towel using warm water mixed with soap before wiping down any surface thoroughly (including areas where you typically can’t reach).

To disinfect your iPhone, you’ll either need a 70% isopropyl alcohol or some sort of cleaning wipe. You should also keep in mind that it’s best to avoid any wipes containing bleach as this can damage the exterior surfaces of your phone.

Once done wiping down all the external parts of your device with these products and wringing out excess liquid before application, let it air dry for about five minutes after which time you’re good to go.

Clean iPhone Speakers with a Soft Brush

Use a soft brush to clean your iPhone speakers. Not only will this remove dirt and dust, but it can also help prevent scratches on the screen.

For best results, use rubbing alcohol with a gentle touch when cleaning around sensitive parts of the phone such as cameras or where wires are attached at both ends next to each other near buttons that could be accidentally pressed if they’re wet from too much liquid applied onto them by most liquids except for water which is okay because you don’t want any dampness getting into those areas while brushing anyway (unless using soap), so just make sure you know what area not to get moisture in.

Once you’ve got the right brush, dip it in rubbing alcohol. Never soak your phone with water or any other liquid – only use a little bit of fluid on the tip to clean out every nook and cranny. You can use a damp brush to remove the dirt and debris from your speaker.

Clean iPhone Speakers with Painter’s Tape

Some people may think of painter’s tape as just a means to keep paint off the surface it is applied to, but there are other ways that this handy product can be used.

Painter’s tape isn’t too sticky when compared with masking or duct tapes so it works well for picking up dirt without leaving any residue behind. This trick especially comes in useful if you have an iPhone and need your speakers free from grime.

Simply tear off a small piece, flip it so that the sticky side is outwards, make sure to roll up one end to form a loop then start rubbing the paint-covered surface back and forth with this loop in order to remove any dirt or dust particles on its edges.

Clean iPhone Speakers with Compressed Air

The compressed air is designed to be used on keyboards and other computer equipment. In order for it not to damage your smartphone, make sure you follow the exact instructions.

To avoid harming your iPhone, it’s imperative that you hold the compressed air away from its speaker. For optimal distance- 9 to 12 inches on average- try holding the nozzle at a 45-degree angle and never point it directly towards any of the speakers or ports.

To prevent damage like scratches in case something gets stuck inside one of them, do not blow hard directly into portholes as this could also present issues with water and liquid getting blown around too much which may result in further harm instead.

Use a Toothpick to Clean Speakers

Cleaning your iPhone speaker with toothpicks is a quick and easy way to remove the dust that accumulates there, but you need to be gentle if you want them in good condition for much longer.

Gently use one end of the pick by pressing it against an edge where no grille holes are located near, then pull away from the phone or push down on another area without any openings nearby at all until dirt builds up around those points.

if you want to avoid a costly and time-consuming repair, be careful when introducing liquids into your iPhone. The grille that protects the phone from liquid damage is very thin so it’s easy for water or other types of fluids to get behind it and cause permanent harm.

Things to avoid while Cleaning iPhone Speaker

When you clean your speakers, don’t use any sharp objects to try and dig out the grime. We’ve seen advice suggesting using tweezers or even paperclips as a scraper for our speaker grilles but that is not recommended.

It’s best to avoid any kind of liquid, even rubbing alcohol. The combination is disastrous for your iPhone and will only leave you needing a new one sooner than later.

FAQs Related to the Topic

How can I clean my iPhone speaker without damaging it?

The best way to clean the speaker on your iPhone is by using a small paintbrush with soft bristles. Soft, fluffy hairs will remove bits of dirt and dust from its surface while also keeping it safe for future use.
If you want the sound coming out of your phone’s speakers to be as clear as possible and who doesn’t? use a trim brush or other similar device, if necessary, in order to get into nooks and crannies that are harder than most brushes can reach.


If you’ve found yourself asking how to clean the iPhone speakers, we have the answer. To do so, there are a few different ways that work perfectly fine and each has its own benefits.  What works best for your needs? 

You can use a wet or dry cloth, compressed air, and swabs with alcohol-based wipes. Not only will this help protect the quality of sound coming from your phone but it will also keep them looking new.

We hope this blog post was helpful in answering any questions related to cleaning iPhone speaker grills or other dirty areas on your phone. I hope that you will understand how to clean iPhone speaker.

For more information about phones visit our website.

Leave a Comment