If you’re having printer problems and need to reset your HP printer, there are several methods you can try. In this article, we’ll show you how to reset HP printers using different methods.
To reset an HP printer, you can use software, the reset button, and a combination of power and so on other buttons.
If your HP printer isn’t connecting to WiFi or any other problem, you might need to perform a network reset.
This will clear all the current network settings on your printer and allow you to start fresh. You might also need to do a firmware reset or even a hard reset if the problem is more serious. A factory reset should only be done as a last resort.
Table of Contents
You should use Software Reset Method
This method will show you how to easily reset your HP printer’s settings back to their defaults. To reset your printer, simply open the printer’s software and locate the reset button.
Once found, click the reset button and your printer will be as good as new!
- Install the printer software.
- On the General tab, click Reset Settings.
- Under Reset Firmware, select Reset.
- A message will receive if you should want to reset the printer. Press Yes.
- So your printer will perfectly reset.
You should use Hardware Reset Method
This guide will show you how to reset your HP printer’s settings to their factory defaults, as well as how to reset the printer’s ink levels so remember that a hard reset on many HP printers can be performed by holding the Power button for 4 seconds.
- Remover the printer’s cover.
- Locate the reset button and click and hold for 5 seconds.
- A message will pop up asking if you should want to reset the printer. So you should press yes.
- So your printer will perfectly reset.
You should use Factory Reset Method
The HP printer factory reset button can be used to reset your printer’s settings or firmware back to its defaults. To reset your printer using this method, you’ll need to open the printer’s software and find the factory reset button. Once you’ve found the button, simply press it and your printer will be reset to its default settings.
- Start the printer software.
- You should search for the factory reset button in the printer software and press it.
- A message will receive if you want to reset the printer. Press Yes.
- So your printer will perfectly reset.
You should also use Factory Reset for a Printer with an LCD Control Panel
- Select the Menu button on your printer control panel.
- Use the arrow buttons to direct to the Factory Reset menu.
- Click the OK button.
- A message will receive if you want to reset the printer. Press Yes.
- So your printer will perfectly reset.
You should use Network Reset Methods
If you’re experiencing common issues with your printer, such as being unable to print or scan, resetting the network settings may help. There are three different ways to reset your network:
One way to try and fix your printer is by unplugging it from the power outlet, waiting for 30 seconds, and then plugging it back in. After you have plugged it back in, turn on the printer and wait for it to start up.
To reset your printer’s network settings, you will need to press and hold the Wireless button and the Cancel button at the same time. After about 15 seconds, you will hear a sound and then your printer’s network settings will be reset.
To reset your network printer using the LCD control panel, follow these steps:
- Click the Menu button on your printer control panel.
- Click on the arrow buttons to go to the Network Settings menu.
- Select the OK button.
- Use the arrow buttons to go to the Reset Network Settings option.
- Select the OK button.
- A message will receive if you want to reset the network settings. Type Yes.
- So your printer will perfectly reset.
What Basic Issues can be Solved by Printer Reset?
- If your printer is offline or not connected to your network
- If printing jobs are stuck in the queue
- If you’re Printer has a paper jam
- If the Print quality is poor
- If your Printer is not printing correctly
- If your Printer is not scanning correctly
- If you are unable to print or scan from the computer or mobile device
- If you have an Incorrect IP address or network settings
- If you can’t connect to the printer over Wi-Fi or Ethernet
- If your Printer is overheating or not turning on
By completing any of the steps above, you will have successfully restored your HP printer to its original factory settings. If you are still experiencing any issues, please reach out to HP support for further assistance.
FAQs about How to Reset HP Printers?
How do we reset my HP wireless printer?
To restore your printer’s network default settings, press and hold the Wi-Fi button on the back of the printer for five seconds or until the control panel display shows a prompt. Once the prompt appears, touch OK.
How do I fix my HP printer problems?
If you’re having trouble with your HP printer, there’s an easy way to fix it. Just open the HP Smart app and click on the “Diagnose & Fix” icon.
If you’re using a Windows computer, the icon is in the bottom left corner. If you’re using a Mac, click on your printer in the top menu bar and then click “Diagnose & Fix.”
Why is our printer connected but not printing?
If your printer isn’t working properly, try doing a hard reset. To do this, turn off the printer, unplug it for a few minutes, and then plug it back in.
If that doesn’t work, try shutting down both the printer and your computer, and then start them back up again. If that still doesn’t work, try uninstalling and reinstalling your printer driver.
Conclusion
Resetting the hp printer is one of the most important settings in your printer settings. If you have any problem with your printer, you should reset your hp printer.
Resetting your printer will not remove your settings or any documents stored in your printer. So reset hp printer is not a big deal.
Hope you enjoyed our article on how to reset HP printers. We hope that it has helped you solve any printing issues that you may have been experiencing.